Sika AnchorFix®-3001

Sika AnchorFix®-3001 is a two component, pure epoxy anchoring adhesive. Using high quality, low-VOC and styrene-free technology, Sika AnchorFix®-3001 has been specifically designed to provide a high-strength, user-friendly and versatile adhesive for use in dry, wet or flooded conditions and on or into numerous base materials. The anchoring adhesive is suitable for medium and heavy loads in both structural and non-structural applications.

• Styrene- free and low-VOC
• Versatile material allows application as adhesive and anchoring gel
• Sets up in dry, wet or flooded conditions

Usage

• Anchoring of rebar or threaded rods in solid base materials (concrete, stone, fully grouted block).
• Grouting horizontally, vertically and overhead (refer to Limitations), where slow-setting allows extended working time.
• Suitable for deeper and scattered holes or applications where a fast-turnaround is not needed.
• Suitable for use as a ‘pick-proof’ sealant in secure or holding suites and similar facilities (horizontal use only)
• Grouting in external environments and where applications are subject to dynamic loads and vibrations.
• Anchoring structural steel to concrete, safety barriers, balcony stanchions, canopies, signs, hand rails, racking, machinery, masonry supports, stadium seats, reinforcing and starter bars.

Advantages

• Styrene- free and low-VOC
• Versatile material allows application as adhesive and anchoring gel
• Sets up in dry, wet or flooded conditions
• Cures without exhibiting expansion pressures
• Extended open and gel times accommodate anchoring in deep and scattered holes
• Permits anchors close to free edges
• Suitable for chemical anchors, threaded bars and reinforcing steel
• Performs in both cracked and non-cracked concrete
• Resistant to a wide range of chemicals, including aqueous solutions of aluminum chloride at saturation, aluminium nitrate at 10 % concentration, jet fuel, diesel fuel, domestic kerosene and many other substances at 75 °C (167 °F) while retaining at least 80 % of physical values (See Chemical Resistance Guide).
• Supports high loads

Packaging

250 mL (8.4 US fl. oz) UVL cartridge/12 per case
600 mL (20.2 US fl. oz) side by side cartridges/12 per case

Colour

Bronze

Application